Loading 3D Model...
Switch Panels
Hilux N90 Centre 5-Switch Panel — 3D Printed Carbon Fibre ASA
5-Switch Panel That Looks Factory in Your N90 Hilux
Replace the blank centre panel in your 2026+ Hilux N90 with a purpose-built 5-switch pod. Holds five standard push switches for your lights, compressor, winch, or any accessories. Clean factory-look installation with no cutting, no drilling, and no modifications to your dash. Printed in Carbon Fibre Reinforced ASA for maximum strength and heat resistance.
Toyota Hilux N90 — 2026 to Current (SR5 & Rugged Models)
Replaces the centre blank panel. Fits SR5 and Rugged models. Adheres over the existing blank panel with double-sided tape. No modifications required.
Why This Panel
5 Switch Positions
Room for all your accessories — lights, compressor, winch, lockers, whatever you need.
No Cutting or Drilling
Adheres over the existing blank panel with double-sided tape. No cutting, no drilling.
Factory Appearance
Designed to match the OEM dash texture and fit. Looks like it came from the factory.
Carbon Fibre Reinforced
ASA-CF material — stronger and stiffer than standard ASA. Won't flex or warp in the heat.
Carbon Fibre Reinforced ASA
Printed in ASA-CF — carbon fibre reinforced ASA plastic. This gives you the UV stability and chemical resistance of ASA, plus the added rigidity and strength of carbon fibre reinforcement. It won't warp on a 50°C dashboard, won't fade in the sun, and won't flex when you push the switches.
Installed in the Hilux N90
Side angle — OZ logo and factory-look fit
Front view — 5 switches populated, factory appearance
Switches not included — shown for demonstration only
Installation
Clean the centre blank panel area with isopropyl alcohol.
Insert your switches into the panel (standard push-switch fitment).
Apply double-sided tape to the back of the panel and press firmly into position.
Important Notes
- Switches not included — This listing is for the switch panel only. Fits standard push switches.
- Wiring not included — You'll need to wire your switches to your accessories.
- Unpainted finish — Matte black carbon fibre reinforced ASA as-printed.
- 2026+ N90 Hilux only — Fits SR5 and Rugged models. Does not fit N80 or earlier models.
Specifications
Need a Custom Bracket or Solution?
Get in touch at sales@ozaudio.com.au — designed and 3D printed in Perth, Australia.
FAQ
No — all brackets come straight off the printer UNPAINTED in matte black ASA plastic. They can be painted by the customer to match your vehicle colour if desired.
No — wiring is not included. You will need to source your own wiring loom to connect the lights.
All our 3D printed parts are made from ASA (Acrylonitrile Styrene Acrylate) plastic. ASA is UV-resistant, heat-resistant, and significantly more durable than standard ABS or PLA plastics. It's the same material used in automotive exterior components.
Orders are typically dispatched within 1-3 business days. Delivery times vary by location. Perth metro pickup is available from Oz Audio Wangara.
