150 Prado Rear Work Lights Brackets pair - 3D printed ASA for Toyota Prado 150 Series
150 Prado Rear Work Lights Bracket installed in red Prado rear bumper showing factory-look fit
150 Prado Rear Work Lights Bracket close-up with Lightforce ROK9 light illuminated
150 Prado Rear Work Lights Bracket installed view from below showing mounting
150 Prado Rear Work Lights Bracket side angle installed in rear bumper
150 Prado Rear Work Lights Bracket detail view of bracket design and finish

Oz Audio Shop

150 Prado Rear Work Lights 3D Printed Brackets | Prado Reverse Lights 3D Printed Brackets

$75.00 $150.00
LIGHT MOUNTING (lights not included):Lightforce ROK9
Quantity:
150 Prado Rear Work Lights Brackets pair - 3D printed ASA for Toyota Prado 150 Series
SALE

3D Printed

150 Prado Rear Work Lights 3D Printed Brackets | Prado Reverse Lights 3D Printed Brackets

$75.00 $150.00 Save $75.00
Wiring not included
Australia-wide delivery available
All orders shipped with full insurance

Upgrade Your Prado's Rear Lighting — Brighter Reversing, Safer Towing

The factory rear fog lights on the 150 Series Prado are not much help when you are reversing in the dark, hooking up a trailer, or lighting up the campsite. These Rear Work Lights Brackets replace the factory rear fog light housings with precision-fit mounts for Stedi ROK / Lightforce ROK9 work lights — transforming your rear bumper into a serious lighting platform without any cutting or drilling.

150 Prado Rear Work Lights Bracket installed with Stedi ROK / Lightforce ROK9 light illuminated in rear bumper
Installed in a 150 Prado rear bumper — ROK9 light fitted (not supplied)
Vehicle Compatibility

Toyota LandCruiser Prado 150 Series — All Models

Fits GX, GXL, VX, and Kakadu variants. Replaces the factory rear fog light housings in the rear bumper. Designed for Stedi ROK / Lightforce ROK9 work lights (not supplied).

Why Prado Owners Choose These Brackets

🔧
No Modifications Required
Direct replacement for the factory rear fog light housings. No cutting, no drilling — bolt-on fitment.
💡
Serious Rear Illumination
Optimised angle for reversing, trailer hookup, and campsite lighting. A massive upgrade over factory fog lights.
🏗
ASA Plastic Construction
3D printed from automotive-grade ASA — UV-resistant, heat-resistant, and built to handle Australian conditions.
🇦🇺
Designed in Perth, Australia
Engineered and 3D printed in Perth, born from real-world Prado ownership.
150 Prado Rear Work Lights Bracket installed in rear bumper showing clean factory-look fit
Clean, factory-look integration in the rear bumper

Built to Handle Australian Conditions

Every bracket is 3D printed in-house from ASA (Acrylonitrile Styrene Acrylate) — the same class of engineering plastic used in automotive exterior trim. ASA offers superior UV resistance, heat tolerance up to 100°C, and impact strength that standard 3D printing plastics simply cannot match.

Installation

Installation is straightforward and requires no special tools:

1
Remove the factory rear fog light housings from the rear bumper
2
Fit the new Rear Work Lights Brackets into the same location
3
Mount your Stedi ROK / Lightforce ROK9 lights into the bracket recesses
4
Wire the lights to your vehicle’s electrical system (wiring loom not included)
Important Notes
  • Lights not included — designed for Stedi ROK / Lightforce ROK9 work lights
  • Wiring not included — you will need to source your own wiring loom
  • Unpainted finish — arrives in matte black ASA, paintable if desired

Specifications

Material ASA (Acrylonitrile Styrene Acrylate) Plastic
Manufacturing 3D Printed in Perth, Australia
Finish Matte Black (unpainted, paintable)
Compatible Lights Stedi ROK / Lightforce ROK9 (not supplied)
Fits Toyota LandCruiser Prado 150 Series
Variants GX, GXL, VX, Kakadu
Installation Direct replacement, no modifications
Includes 1× Pair Rear Work Lights Brackets (lights & wiring not included)
Need a Custom Bracket?

We design and 3D print custom brackets for a range of 4WD vehicles.

Contact us at sales@ozaudio.com.au for custom requests.

Common Questions

FAQ

You May Also Like

Related Products

LC200 Tailgate Light Bracket front view - 3D printed mounting bracket for Toyota LandCruiser 200
New

LC200 Tailgate Light 3D Printed Bracket

$30.00
6.5

6.5" Front Speaker Spacers - Holden Commodore VT VX VY VZ

$40.00
PY-RA Next Gen Ranger Switch Panel - 3D printed cup holder replacement for 6 switches
New

PY-RA Next Gen Ranger Driver's Cup Holder Replacement Switch Panel

$40.00
07-15 LC200 Rear Work Lights Brackets pair - 3D printed ASA for LandCruiser 200 pre-facelift
New

07-15 LC200 Rear Work Lights 3D Printed Brackets | Landcruiser Reverse Lights 3D Printed Brackets

$75.00
3D Printed Tweeter Brackets – Holden Commodore VT VX VY VZ (1997–2006)

3D Printed Tweeter Brackets – Holden Commodore VT VX VY VZ (1997–2006)

$15.00
Holden VT-VZ rear 6.5 inch speaker spacer pair

6.5" Rear Speaker Spacers - Holden Commodore VT VX VY VZ

$30.00
3D Printed Tweeter Brackets – Holden Commodore VE (2006–2013)

3D Printed Tweeter Brackets – Holden Commodore VE (2006–2013)

$15.00
LC200 Rear Work Lights Brackets pair - 3D printed ASA for LandCruiser 200 2016-2021
New

LC200 Rear Work Lights 3D Printed Brackets | Landcruiser Reverse Lights 3D Printed Brackets

$75.00
3D Printed Tweeter Pods – Isuzu D-Max & MU-X (2012+)

3D Printed Tweeter Pods – Isuzu D-Max & MU-X (2012+)

$15.00
Next Gen Ranger Tub Lights Bracket - 3D printed ASA for Ford Ranger Raptor 2022+
New

Next Gen Ranger / Raptor Tub Lights 3D Printed Brackets

$60.00
3D Printed Tweeter Pods – Suzuki Jimny JB74 (2018+)

3D Printed Tweeter Pods – Suzuki Jimny JB74 (2018+)

$110.00
3D Printed Tweeter Brackets – Nissan NP300 Navara & Y62 Patrol

3D Printed Tweeter Brackets – Nissan NP300 Navara & Y62 Patrol

$15.00
6.5

6.5" Front Door Speaker Pods – Isuzu NP75 Truck

$100.00
8

8" Front Door Speaker Pods – Isuzu NP75 Truck

$165.00
Fortuner Rear Work Lights Brackets pair - 3D printed ASA for Toyota Fortuner
New

Fortuner Rear Work Lights 3D Printed Brackets

$124.50
Pajero Sport rear work light brackets pair - front view
New

Pajero Sport Rear Work Lights 3D Printed Brackets | Mitsubishi Reverse Lights

$100.00
6x9 to 8

6x9 to 8" Speaker Spacers - Toyota Prado 150 & LC200 (2009+)

$50.00
6.5 to 8

6.5 to 8" Speaker Spacers - Toyota Hilux (2015+)

$40.00
6x9 to 8

6x9 to 8" Speaker Spacers - Ford Ranger PY (2022+)

$50.00

Upgrade Your Prado's Rear Lighting — Brighter Reversing, Safer Towing

The factory rear fog lights on the 150 Series Prado are not much help when you are reversing in the dark, hooking up a trailer, or lighting up the campsite. These Rear Work Lights Brackets replace the factory rear fog light housings with precision-fit mounts for Stedi ROK / Lightforce ROK9 work lights — transforming your rear bumper into a serious lighting platform without any cutting or drilling.

150 Prado Rear Work Lights Bracket installed with Stedi ROK / Lightforce ROK9 light illuminated in rear bumper
Installed in a 150 Prado rear bumper — ROK9 light fitted (not supplied)
Vehicle Compatibility

Toyota LandCruiser Prado 150 Series — All Models

Fits GX, GXL, VX, and Kakadu variants. Replaces the factory rear fog light housings in the rear bumper. Designed for Stedi ROK / Lightforce ROK9 work lights (not supplied).

Why Prado Owners Choose These Brackets

🔧
No Modifications Required
Direct replacement for the factory rear fog light housings. No cutting, no drilling — bolt-on fitment.
💡
Serious Rear Illumination
Optimised angle for reversing, trailer hookup, and campsite lighting. A massive upgrade over factory fog lights.
🏗
ASA Plastic Construction
3D printed from automotive-grade ASA — UV-resistant, heat-resistant, and built to handle Australian conditions.
🇦🇺
Designed in Perth, Australia
Engineered and 3D printed in Perth, born from real-world Prado ownership.
150 Prado Rear Work Lights Bracket installed in rear bumper showing clean factory-look fit
Clean, factory-look integration in the rear bumper

Built to Handle Australian Conditions

Every bracket is 3D printed in-house from ASA (Acrylonitrile Styrene Acrylate) — the same class of engineering plastic used in automotive exterior trim. ASA offers superior UV resistance, heat tolerance up to 100°C, and impact strength that standard 3D printing plastics simply cannot match.

Installation

Installation is straightforward and requires no special tools:

1
Remove the factory rear fog light housings from the rear bumper
2
Fit the new Rear Work Lights Brackets into the same location
3
Mount your Stedi ROK / Lightforce ROK9 lights into the bracket recesses
4
Wire the lights to your vehicle’s electrical system (wiring loom not included)
Important Notes
  • Lights not included — designed for Stedi ROK / Lightforce ROK9 work lights
  • Wiring not included — you will need to source your own wiring loom
  • Unpainted finish — arrives in matte black ASA, paintable if desired

Specifications

Material ASA (Acrylonitrile Styrene Acrylate) Plastic
Manufacturing 3D Printed in Perth, Australia
Finish Matte Black (unpainted, paintable)
Compatible Lights Stedi ROK / Lightforce ROK9 (not supplied)
Fits Toyota LandCruiser Prado 150 Series
Variants GX, GXL, VX, Kakadu
Installation Direct replacement, no modifications
Includes 1× Pair Rear Work Lights Brackets (lights & wiring not included)
Need a Custom Bracket?

We design and 3D print custom brackets for a range of 4WD vehicles.

Contact us at sales@ozaudio.com.au for custom requests.